Weighing cabin
With built-in supply air distribution and return air removal for personnel and product protection when weighing out and filling in substances, in compliance with the requirements of DIN EN ISO 14 644-1 Class 5, or M3.5 (100) to US Federal Standard 209E. The work area is vertically flushed with low-turbulence displacement flow and the return air is removed via the prefilter in the back wall. Weighing precision is not impaired, the weighed substances are kept free of germs and particles.

-Vertical low-turbulence displacement flow
-Can be used for table or floor scales on site
-Compact and operational
-Available in several standart sizes
-Two stage prefilter with G3 filter mat and F7 filter cell
-Class H14 HEPA filter for supply air and exhaust air
-Buillt-in radial fan with adjustable speed drive motor
-Gauge for pressure diferential  and wolume flow rates.
-High operational safety by permanent supervision
-Easy to disinfect.

The weighing cabins are fully assembled and delivered in an operational condition. Every unit is throughly checked
beforehand at the factory.

During operation the discharge velocity of the low turbulance displacement flow amounts to about 0,45 m/s. When not inoperation at night and on free days it can be reduced using a day/night switch (optional) to 0,25 m/s.

Functiona and secure working on the weighing cabins in daily operation is ensured by permanent supervision of the supply  air volume flow rate using a built-in volume flow rate gauge and by readjusting the fan throughtput capacity manually.

 Type code
 T = For table scales
 B= For floor scales
 Size
 1= A x B x C = 1300x1300x2200
 2= A x B x C = 1300x1600x2200
 3= A x B x C = 1600x1900x2200
 4= Special dimensions

 

Powder control booths providing containment and clean air for safe handling of fine powders
Weighing cabin with low-turbulance, vertical displacement flow for Class 100 to accommodate on-site TABLE SCALES or FLOOR SCALES.

Decanting, weighing or testing of fine powders including pharmaceutical products, specialty chemicals, colour pigments; testing of aerosol products; containment of pharmacutical or any process machinery when clean air conditions are also required; industrial processes involving dust shedding; paint spraying; any other activity where a combination of containment and clean air is required.

	Available in a wide range of sizes and configurations including free standing, compact (for low headroom) and ceiling mounted.
	Removable side panels, if required, to enable unrestricted linking of adjacent units.
	Filter changes and all maintenance from within the booth (no external access or plant room required).
	Available in stainless steel or polyester coated mild steel.
	Easy to clean and robust panel construction.
	Remote low voltage microprocessor based membrane control panel
	Terminal control box at unit.
	Easy data link connection (up to 25m) between remote membrane control panel and terminal control box,
	Link facility in remote membrane control panel to allow control of multiple units on a master slave basis.
	BMS outputs.
	High capacity 'W' form primary filters installed at the rear of the unit with easy and safe replacement
	High performance underclamped ceiling mounted HEPA secondary filters.
	Strip lighting with airflow straightening grilles.
	Wide range of further options.

	Choice of materials: polyester coated mild steel or stainless steel
	Choice of sizes
	Choice of mountings: free-standing, floor mounted, or ceiling mounted.
	Choice of configurations,
	Removable side-panels to enable unrestricted linking of adjacent units,
	Slatted PVC drapes. Choice of exhaust systems including:
	Recirculating
	Ducted
	Plant extract
	Stainless steel worktops, sink units and other purpose designed integral or freestanding furnishings.
	Electrical sockets, computer sockets and all services