 |
Clean and attractive design in polyester coated steel
construction |
 |
Very high levels of operator and product protection |
 |
Very high level of protection against cross-contamination
|
 |
Self-sealing light-weight night door |
 |
Electropolished stainless steel work surface with four litre
spillage capacity |
 |
Integral double HEPA exhaust filtration on recirculating models
|
 |
Integral double HEPA filtration of downflow on all models
|
 |
All fans downstream of main HEPA filter, for longer life and
safe maintenance |
 |
Main HEPA filter removable from front of cabinet without
dismantling fan, electrics or ductwork |
 |
Prefilter for extended main HEPA filter life |
 |
Cabinet body under negative pressure in accordance with BS5726
(1992) |
 |
Safety device to prevent use of formalin or UV when front of
cabinet not fully sealed |
 |
Fully alarmed |
 |
Easy to clean membrane control panel with digital air inflow
indicator |
 |
Access to all electrics, electronics and instrumentation behind
lockable front panel |
 |
Aerodynamically independent interlocked downflow and exhaust
fans for easy set-up |
 |
Manual/automatic fan speed control |
 |
Built in BMS (Building Management System) signal outputs |
 |
Auto-damper output signal |
 |
Fast and easy set up and maintenance with all access from front
of cabinet |
 |
Support stand with castors (for BI0 2+R) |
 |
Support stand with adjustable feet (for BIO 2+D and H) Exhaust
spigot for short duct runs (BIO 2+R only) |
 |
Formalin vaporiser |
 |
Mobile self contained fumigant extractor suitable for formalin
|
 |
0utlet adaptor and 3m flexible ducting for use with formalin
vaporiser (BIO 2+R only) |
 |
Sliding lead glass screen and lead lining for
radiopharmaceutical applications(BIO 2+R and D 1.2 only)
|
 |
Water tap |
 |
Splashproof electrical socket Solenoid controlled fail-safe gas
fitting |
 |
Taps for compressed air, vacuum, N2 etc |
 |
lnternal UV tube (refer to BS 5726 Part 1 1992 6.1 and 6.2) |
 |
Stainless Steel lined work area |